P

R

O

D

U

C

T

S

 

ASTM A500-93

BS 6363: 1983

ASTM-A53

BS : 1387 of 1985

BS EN39 of 200

ASTM - A50093 :                                                                       

Square Hollow Sections :          Page1       Page2
Rectangular  Hollow Sections :  Page1      Page2

Rectangular  HOLLOW SECTIONS AS PER ASTM A 500-93          Page2

Sr.

No.

Size

Thickness Tolerances On Kg./Mtr. lb/ft

Outer Dimensions (incl. conc./convx.)

Thickness Corner radius (Max.) Twist On 

6 M./19' 8.22" (Max)

Larger Smaller

inch

 mm inch mm inch mm inch mm inch mm inch mm
8

4"x4"

 101.6x101.6 0.120 3.05 +0.03   +0.76   +10% 0.360 9.15 0.494 12.54 9.23 6.21

4"x4"

 101.6x101.6 0.125 3.18 +0.03   +0.76   +10% 0.376 9.54 0.494 12.54 9.60 6.45

4"x4"

 101.6x101.6 0.156 3.96 +0.03   +0.76   +10% 0.468 11.88 0.494 12.54 11.80 7.94

4"x4"

 101.6x101.6 0.180 4.57 +0.03   +0.76   +10% 0.540 13.71 0.494 12.54 13.50 9.07
4"x4" 101.6x101.6 0.1875 4.76 +0.03   +0.76   +10% 0.562 14.28 0.494 12.54 14.00 9.41
9
5"x5" 127x127 0.156 3.96 +0.03   +0.76   +10% 0.468 11.88 0.572 14.52 13.95 9.35
5"x5" 127x127 0.180 4.57 +0.03   +0.76   +10% 0.540 13.71 0.572 14.52 17.10 11.50
5"x5" 127x127 0.1875 4.76 +0.03   +0.76   +10% 0.562 14.28 0.572 14.52 17.80 12.00
10
6"x6" 152.4x152.4 0.156 3.96 +0.06   +1.52   +10% 0.468 11.88 0.572 14.52 16.89 11.32
6"x6" 152.4x152.4 0.180 4.57 +0.06   +1.52   +10% 0.540 13.71 0.572 14.52 20.80 14.00
6"x6" 152.4x152.4 0.1875 4.76 +0.06   +1.52   +10% 0.562 14.28 0.572 14.52 21.60 14.50
11
7"x7" 177.8x177.8 0.156 3.96 +0.07   +1.78   +10% 0.468 11.88 0.657 16.68 19.84 13.29
7"x7" 177.8x177.8 0.180 4.57 +0.07   +1.78   +10% 0.540 13.71 0.657 16.68 24.40 16.40
7"x7" 177.8x177.8 0.1875 4.76 +0.07   +1.78   +10% 0.562 14.28 0.657 16.68 25.40 17.10
12
8"x8" 203.2x203.2 0.1875 4.76 +0.08   +2.03   +10% 0.562 14.28 0.657 16.68 29.20 19.60
Tolerances on outer dimensions includes Tolerances on concavity/Convexity.

Square ness   : 90 + 2 deg

Straightness  :  0.492" (12.50 mm) maximum in 19' 8.22" (6.00 M.) length.

Specified mill length tolerances :

                            Upto & Including 22' : + 1/2", -1/4"

                            Above 22', upto & including 44'  : + 3/4", - 1/4"

                                                        OR

                             Upto & including 6.70 M. : + 12.70mm /- 6.40mm.

                              Above 6.70 M., Upto & including 13.40 M.: + 19.00mm /- 6.40mm.

Kg. / mtr.  :           ASTM is silent about Kg. / Mtr. The Kg. / Mtr. & lb ./ ft.

                               The figures are taken from MARUICHI Catalouge.

 

Square Hollow Sections :          Page1       Page2
Rectangular  Hollow Sections :  Page1       Page2

 

Plant & Process    Products    Application    Quality Control  Investers' Info   Contact us

 

Homepage